Gym Cable Coatings: PA11 Nylon vs TPU
We supply coated gym cables in two coating families: PA11 nylon (two lines, with imported or China-made steel rope) and TPU. In our bench tests, PA11 cables reached 128,000 to 1,000,000 cycles and TPU cables reached 100,000 to 138,000 cycles, each at the load and pulley diameter shown in the tables below. Pick the coating by the cycle life your machine needs, and match the pulley diameter to the cable.
Which coating should you choose?
| Your priority | Choose | Why (from our test data) |
|---|---|---|
| Longest cycle life on commercial stacks | PA11 nylon, imported steel rope (Premium line) | Up to 1,000,000 cycles at 100–120 kg on 4.8 and 5.6 mm sizes |
| Commercial or OEM use with a 300,000-cycle target | PA11 nylon, China-made steel rope (Standard line) | 300,000 cycles at 100–120 kg for 4.76/5.6 mm; 128,000 at 150 kg for 6.35 mm; 4 catalog sizes |
| Equipment designed for a PU/TPU coating, or a cycle target around 100,000 | TPU | 100,000–138,000 cycles at 100–150 kg on tested sizes; 5 sizes from 4.0 to 7.8 mm |
The three cable lines at a glance
PA11 · Imported rope
Imported steel wire rope with PA11 nylon, galvanized wire, 0.8 mm per side. Sizes: 4.0, 4.76, 5.6 mm.
PA11 · China-made rope
China-made galvanized 7×19 steel rope with PA11 nylon. Sizes: 4.76, 5.6, 6.35, 7.8 mm.
TPU
Galvanized steel rope with a TPU coating, 0.8–0.9 mm per side. Sizes: 4.0, 4.76, 5.8, 6.35, 7.8 mm.
Specifications by line
All steel wire is galvanized. Breaking loads are minimum values; pound figures are converted from kilograms (1 kg = 2.205 lb). The tensile figure is the wire grade in MPa. Cycle tests used 3–5 pulley sets of the diameter shown, at the load shown.
PA11 nylon · imported steel rope
| Finished OD (mm) | Steel core / coated OD (mm) | Construction | Steel grade / tensile | Min. breaking load | Weight (kg/1000 m) | Coating | Cycle test |
|---|---|---|---|---|---|---|---|
| 4.0 ±0.1 | 2.4 / 4.0 | 7×19, steel core | 62A / 2160 | 600 kg (≈1,323 lb) | 34 | PA11, 0.8 mm per side | Over 300,000 at 75 kg, Ø90 mm pulleys |
| 4.8 ±0.1 | 3.18 / 4.76 | 7×19, steel core | 62A / 2160 | 1,100 kg (≈2,425 lb) | 59.7 | PA11, 0.8 mm per side | 1,000,000 at 100 kg, Ø90 mm pulleys |
| 5.6 ±0.1 | 3.97 / 5.6 | 6×19 + 8×7 + 1×19, steel core | 72A / 2160 | 1,360 kg (≈2,998 lb) | 81.65 | PA11, 0.8 mm per side | 1,000,000 at 120 kg, Ø110 mm pulleys |
PA11 nylon · China-made steel rope
| Finished OD (mm) | Steel core / coated OD (mm) | Construction | Steel grade / tensile | Min. breaking load | Weight (kg/1000 m) | Coating | Cycle test |
|---|---|---|---|---|---|---|---|
| 4.8 ±0.1 | 3.18 / 4.76 | 7×19, steel core | #60 / 1960 | 970 kg (≈2,138 lb) | 56.55 | PA11, 0.8 mm per side | 300,000 at 100 kg, Ø90 mm pulleys |
| 5.6 ±0.2 | 3.97 / 5.6 | 7×19, steel core | #60 / 1960 | 1,360 kg (≈2,998 lb) | 80.7 | PA11, 0.9 mm per side | 300,000 at 120 kg, Ø110 mm pulleys |
| 6.35 ±0.2 | 4.8 / 6.35 | 7×19, steel core | #60 / 1960 | 1,900 kg (≈4,189 lb) | 115 | PA11, 0.8 mm per side | 128,000 at 150 kg, Ø110 mm pulleys |
| 7.8 ±0.2 | 6 / 7.8 | 7×19, steel core | #60 / 1960 | 2,600 kg (≈5,732 lb) | 172 | PA11, 0.9 mm per side | Test data not yet available |
TPU
| Finished OD (mm) | Steel core / coated OD (mm) | Construction | Steel grade / tensile | Min. breaking load | Weight (kg/1000 m) | Coating | Cycle test |
|---|---|---|---|---|---|---|---|
| 4.0 ±0.1 | 2.4 / 4.0 | 7×7, steel core | #60 / 1960 | 600 kg (≈1,323 lb) | 34 | TPU, 0.8 mm per side | Test data not yet available |
| 4.8 ±0.1 | 3.18 / 4.76 | 7×19, steel core | #60 / 2160 | 970 kg (≈2,138 lb) | 59 | TPU, 0.8 mm per side | 100,000 at 100 kg, Ø90 mm pulleys |
| 5.8 ±0.1 | 3.97 / 5.8 | 7×19, steel core | #60 / 2160 | 1,360 kg (≈2,998 lb) | 87 | TPU, 0.9 mm per side | 100,000 at 120 kg, Ø110 mm pulleys |
| 6.35 ±0.1 | 4.8 / 6.35 | 7×19, steel core | #60 / 1960 | 1,900 kg (≈4,189 lb) | 111 | TPU, 0.8 mm per side | 138,000 at 150 kg; test pulley diameter not listed |
| 7.8 ±0.1 | 6 / 7.8 | 7×19, steel core | #60 / 1960 | 2,600 kg (≈5,732 lb) | 172 | TPU, 0.9 mm per side | Test data not yet available |
Who each option suits
Equipment OEMs
Specify by finished OD, breaking load and the cycle target in the tables. Send your pulley diameter and load so we can match a line.
Gyms and service teams
For replacements, match the original finished OD and end fittings. See How to Measure a Gym Cable.
Distributors
Choose lines by the cycle life your customers expect. The 4.8 mm size is available in all three lines, so it is a simple starting point for a stock range.
When these cables are not recommended
- Pulleys smaller than those in our tests. Refer to each test row: Ø90 mm for tested 4.0/4.76 mm cables; Ø110 mm for tested 5.6/5.8 mm and PA11 6.35 mm cables. The TPU 6.35 mm result does not state a test pulley diameter. Test pulleys are not universal minimum compatible pulley sizes. Ask for machine-specific approval.
- Loads above the tested load. Do not apply the cycle results to heavier working loads than those shown.
- TPU where cycle life is the top priority. Our TPU tests reached 100,000–138,000 cycles; for high-frequency commercial stacks, choose a PA11 line.
- The 4.0 mm TPU and 7.8 mm sizes where you need proven cycle life. We do not yet have test data for these sizes; ask us about project-specific testing.
- Any use without a verified safe working load and safety factor. Breaking load is not a safe working load. Cable and termination selection must follow the equipment manufacturer’s design requirements.
Frequently asked questions
Which gym cable coating lasts longest?
In our bench tests, PA11 nylon-coated cables reached 128,000 to 1,000,000 cycles, and TPU-coated cables reached 100,000 to 138,000 cycles, each under the load and pulley diameter stated in the specification tables. Results depend on the whole cable, not the coating alone.
What do the cycle-test numbers mean?
They are bench-test results at the stated load, with 3 to 5 pulley sets of the stated diameter. They are not a warranty. Service life in a machine depends on pulley diameter, groove condition, alignment, load and maintenance.
Can I use smaller pulleys than the ones in your tests?
We do not recommend it. Smaller pulleys increase bending stress and will shorten cable life compared with the test results. Tell us your pulley diameter and we will advise.
Which nylon do your coated gym cables use?
Our nylon-coated gym cables use PA11 coating. If you are replacing a cable made with a different nylon, send your measurements and photos and we will confirm the match.
Tell us your machine, load and pulley size
Send the cable size, working load and pulley diameter, and we will recommend a line and confirm the specification before quoting.